Category: QUESTIONS & ANSWERS
How to measure the sensitivity of the label at different angles?
* Question
How to measure the sensitivity of the label at different angles?
* Answer
The first step is to first set the reader's transmit po [...]
What is included in the MSCAN initialization process?
* Question
What is included in the MSCAN initialization process?
* Answer
(1) If the MSCAN module is currently running, it will enter the sl [...]
How do I configure the FPGA using Boundary Scan mode (JTAG mode)?
* Question
How do I configure the FPGA using Boundary Scan mode (JTAG mode)?
* Answer
First connect the USB cable to the experiment board, t [...]
What is the detection method for the lean gas sensor?
* Question
What is the detection method for the lean gas sensor?
* Answer
(1) Check the sensor heater resistance. Set the ignition switch to [...]
Brief description of the active array structure?
* Question
Brief description of the active array structure?
* Answer
For a single-tube RRAM memory device, when the RRAM resistive memory is [...]
What are the characteristics of the S6E63D6?
* Question
What are the characteristics of the S6E63D6?
* Answer
(1) 240RGB × 320 pixel AMOLED display controller / driver Ic, showing 260,0 [...]
Application of three basic circuits of amplifier circuit and selection of its parameters
* Question
Application of three basic circuits of amplifier circuit and selection of its parameters
* Answer
The application of the three ba [...]
What are the main parameters of the humidity sensitive Resistors?
* Question
What are the main parameters of the humidity sensitive Resistors?
* Answer
1.Relative Humidity Relative humidity is the ratio of [...]
What are the main features of the NCP5009?
* Question
What are the main features of the NCP5009?
* Answer
The main features of the NCP5009 are: the input voltage range is 2.7 to 6.OV; [...]
The power sequence is often implemented in a cascaded way. What is wrong with this approach?
* Question
The power sequence is often implemented in a cascaded way. What is wrong with this approach?
* Answer
1 It is difficult to synchr [...]