Three-axis magnetometers are used for heading, map rotation, robotic navigation, asset tracking, and magnetic-field event detection. Selecting the right device…

Temperature, relative humidity, and barometric pressure are fundamental environmental parameters in smart home products, wearables, environmental data loggers, air-quality monitors,…

In relay, solenoid, indicator, LED display, and small-motor control circuits, an MCU or logic controller usually cannot drive higher-voltage, higher-current…

USB-to-UART selection involves more than baud rate. Handshaking signals, I/O voltage, package, driver support, configuration, and RS-485 direction control all…

Overview The ADG417BRZ-REEL is a high-performance single-pole single-throw (SPST) CMOS analog switch from Analog Devices (ADI) , designed for applications…

TPS5430MDDAREP, TPS5450MDDAREP, and TPS54331DDAR are all nonsynchronous buck converters with an integrated high-side MOSFET. Each device requires an external catch…

The ICL7660ACBAZA-T, MAX660CSA+T, and LM2663MX/NOPB are all inductorless switched-capacitor voltage converters. With two main external capacitors, each device can be…

The FPF2104, FPF2101, and FPF2106 are Full Function Load Switches from onsemi’s IntelliMAX™ series, built on the same current-limited P-channel MOSFET platform. They integrate…

All three are 25 MBd high-speed digital optocouplers using a CMOS-driver, CMOS-detector architecture. Their inputs accept logic levels directly with…

AD620ARZ, AD8221ARZ, and INA128UA are all precision instrumentation amplifiers whose gain is set by a single external resistor, widely used…