* Question
| What is the detection method for the throttle position sensor of the Audi 200? |
* Answer
| 1 Turn on the ignition switch and check the voltage of the power supply terminal of the connector with the multimeter voltage block on the harness side. The voltage is the battery voltage.
2 Turn off the ignition switch, unplug the throttle harness connector, and check the conduction status of the relevant terminal with a multimeter electric block.The large load switch signal terminal and the intermediate terminal should not be connected: when the throttle opening is greater than 570 and the large load switch is closed, that is, when the large load switch contact is closed, the large load switch signal terminal and the intermediate terminal should be turned on. |
COMMENTS