* Question
| What are the precautions for using MOS field effect transistors? |
* Answer
| Note on the use of MOS field effect transistors: MOS field effect transistors should be classified when used, and cannot be interchanged at will.It is also possible to connect the individual pins together with a thin copper wire or to wrap it in tin foil.
2. The removed MOS device cannot slide on the plastic plate, and the metal disk is used to hold the standby device. 3. The soldering iron for soldering must be well grounded. 4. Before the soldering, the power cable of the circuit board should be shorted to the ground wire, and then the MOS device is separated after soldering.When checking the circuit, please pay attention to verify whether the original protection diode is damaged. |
COMMENTS